 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Aluminum Electrolytic Capacitors/ XB Snap-in Type Series: XB Type: TS Features Endurance : 105 C 7000 h RoHS directive compliant Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan -40 C to +105 C 160 V.DC to 250 V.DC 180 F to 2200 F 20 % (120 Hz/+20 C) 3 CV (A) max. After 5 minutes application of rated working voltage at +20 C. C : Capacitance (F) V: W.V. (V.DC) 120 1.00 500 1.20 1k 1.25 10 k to 1.40 -25 C to +105 C 315 V.DC to 450 V.DC 39 F to 680 F Please see the attached standard products list Frequency (Hz) 50 60 100 Frequency Correction Factor for Ripple Current Correction Factor 0.75 0.80 0.95 After 7000 hours application of DC voltage with specified ripple current (< rated DC working voltage) at +105 C2 C, the capacitors shall meet the following limits. Endurance Capacitance change <20 % of initial measured value tan < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 C2 C within no voltage applied and then being stabilized at +20 C, capacitor shall meet the limits specified in Endurance (With voltage treatment) Shelf Life Dimensions in mm (not to scale) Polarity bar Sleeve (1 0.0 (mm) 2-2.00.1 ) 10 . 0 0.1 D+1.0 max. Vent L+2.0 max. Rated voltage etc. indicate to sleeve. 4.00.5 (D) Recommended PWB piercing plan 0.8 -0.1 (3.5) 4.00.5 +0.2 2.0 max. Terminal (t=0.8) 1.50.2 Top of spin Standard terminal type does not require terminal trimming process. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jul. 2008 Aluminum Electrolytic Capacitors/ XB Standard Products Case size W.V. Cap. (120 Hz) (20 %) (F) 270 330 390 470 560 Dia. (mm) 22 22 22 25 22 25 22 25 30 22 25 30 25 30 25 30 25 30 35 30 35 30 35 35 22 22 22 25 22 25 22 25 30 22 25 30 22 25 30 25 30 35 30 35 30 35 30 35 35 35 Length (mm) 25 30 30 25 35 30 40 30 25 45 35 30 40 30 45 35 50 40 35 45 35 50 40 50 25 25 30 25 30 25 35 30 25 40 35 25 50 40 30 45 35 30 40 30 45 35 50 40 45 50 Part No. PET sleeve Terminal Length 4.0 mm (Without Top Plate) EETXB2C271HJ EETXB2C331HJ EETXB2C391HJ EETXB2C391JJ EETXB2C471HJ EETXB2C471JJ EETXB2C561HJ EETXB2C561JJ EETXB2C561KJ EETXB2C681HJ EETXB2C681JJ EETXB2C681KJ EETXB2C821JJ EETXB2C821KJ EETXB2C102JJ EETXB2C102KJ EETXB2C122JJ EETXB2C122KJ EETXB2C122LJ EETXB2C152KJ EETXB2C152LJ EETXB2C182KJ EETXB2C182LJ EETXB2C222LJ EETXB2P221HJ EETXB2P271HJ EETXB2P331HJ EETXB2P331JJ EETXB2P391HJ EETXB2P391JJ EETXB2P471HJ EETXB2P471JJ EETXB2P471KJ EETXB2P561HJ EETXB2P561JJ EETXB2P561KJ EETXB2P681HJ EETXB2P681JJ EETXB2P681KJ EETXB2P821JJ EETXB2P821KJ EETXB2P821LJ EETXB2P102KJ EETXB2P102LJ EETXB2P122KJ EETXB2P122LJ EETXB2P152KJ EETXB2P152LJ EETXB2P182LJ EETXB2P222LJ Specification Ripple tan Current (120 Hz) (120 Hz) (+20 C) (+105 C) max. (A r.m.s.) 1.10 0.15 1.20 0.15 1.30 0.15 1.30 0.15 1.40 0.15 1.40 0.15 1.50 0.15 1.50 0.15 1.50 0.15 1.70 0.15 1.70 0.15 1.70 0.15 2.00 0.15 2.00 0.15 2.20 0.15 2.20 0.15 2.30 0.15 2.30 0.15 2.30 0.15 2.50 0.15 2.50 0.15 2.70 0.15 2.70 0.15 2.90 0.15 1.00 0.15 1.10 0.15 1.20 0.15 1.20 0.15 1.30 0.15 1.30 0.15 1.40 0.15 1.40 0.15 1.40 0.15 1.50 0.15 1.50 0.15 1.50 0.15 1.70 0.15 1.70 0.15 1.70 0.15 2.00 0.15 2.00 0.15 2.00 0.15 2.20 0.15 2.20 0.15 2.30 0.15 2.30 0.15 2.50 0.15 2.50 0.15 2.70 0.15 2.90 0.15 Min. Packaging Q'ty (V. DC) 680 160 820 1000 1200 1500 1800 2200 220 270 330 390 470 560 180 680 820 1000 1200 1500 1800 2200 (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 200 100 100 100 100 100 100 Endurance : 105 C 7000 h, Terminal Pitch : 10 mm When capacitors of 35 45L and 35 50L are mounted on PWB, reinforce them with mounting clamp or adhesives. (Avoid using adhesives including halogenated compositions.) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jul. 2008 Aluminum Electrolytic Capacitors/ XB Standard Products Case size W.V. Cap. (120 Hz) (20 %) (F) 220 270 330 390 Dia. (mm) 22 22 25 22 25 22 25 30 22 25 30 22 25 30 25 30 25 30 35 30 35 30 35 35 22 25 22 25 22 25 30 22 25 30 22 25 30 25 30 35 25 30 35 30 35 30 35 35 35 Length (mm) 25 30 25 30 25 35 30 25 40 35 30 45 35 30 40 35 50 40 30 45 35 50 40 50 30 25 30 25 35 30 25 40 35 25 45 35 30 45 35 30 50 35 30 45 35 50 40 45 50 Part No. PET sleeve Terminal Length 4.0 mm (Without Top Plate) EETXB2D221HJ EETXB2D271HJ EETXB2D271JJ EETXB2D331HJ EETXB2D331JJ EETXB2D391HJ EETXB2D391JJ EETXB2D391KJ EETXB2D471HJ EETXB2D471JJ EETXB2D471KJ EETXB2D561HJ EETXB2D561JJ EETXB2D561KJ EETXB2D681JJ EETXB2D681KJ EETXB2D821JJ EETXB2D821KJ EETXB2D821LJ EETXB2D102KJ EETXB2D102LJ EETXB2D122KJ EETXB2D122LJ EETXB2D152LJ EETXB2E181HJ EETXB2E181JJ EETXB2E221HJ EETXB2E221JJ EETXB2E271HJ EETXB2E271JJ EETXB2E271KJ EETXB2E331HJ EETXB2E331JJ EETXB2E331KJ EETXB2E391HJ EETXB2E391JJ EETXB2E391KJ EETXB2E471JJ EETXB2E471KJ EETXB2E471LJ EETXB2E561JJ EETXB2E561KJ EETXB2E561LJ EETXB2E681KJ EETXB2E681LJ EETXB2E821KJ EETXB2E821LJ EETXB2E102LJ EETXB2E122LJ Specification Ripple tan Current (120 Hz) (120 Hz) (+20 C) (+105 C) max. (A r.m.s.) 1.00 0.15 1.10 0.15 1.10 0.15 1.20 0.15 1.20 0.15 1.30 0.15 1.30 0.15 1.30 0.15 1.40 0.15 1.40 0.15 1.40 0.15 1.50 0.15 1.50 0.15 1.50 0.15 1.70 0.15 1.70 0.15 2.00 0.15 2.00 0.15 2.00 0.15 2.20 0.15 2.20 0.15 2.30 0.15 2.30 0.15 2.50 0.15 0.90 0.15 0.90 0.15 1.00 0.15 1.00 0.15 1.10 0.15 1.10 0.15 1.10 0.15 1.20 0.15 1.20 0.15 1.20 0.15 1.30 0.15 1.30 0.15 1.30 0.15 1.40 0.15 1.40 0.15 1.40 0.15 1.50 0.15 1.50 0.15 1.50 0.15 1.70 0.15 1.70 0.15 2.00 0.15 2.00 0.15 2.20 0.15 2.30 0.15 Min. Packaging Q'ty (V. DC) 470 200 560 680 820 1000 1200 1500 180 220 270 330 390 250 470 560 680 820 1000 1200 (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 200 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 200 100 200 100 100 100 100 100 100 Endurance : 105 C 7000 h, Terminal Pitch : 10 mm When capacitors of 35 45L and 35 50L are mounted on PWB, reinforce them with mounting clamp or adhesives. (Avoid using adhesives including halogenated compositions.) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jul. 2008 Aluminum Electrolytic Capacitors/ XB Standard Products Case size W.V. Cap. (120 Hz) (20 %) (F) 82 100 120 150 Dia. (mm) 22 22 22 25 22 25 30 22 25 30 22 25 30 25 30 35 25 30 35 30 35 30 35 35 35 22 22 25 22 25 22 25 30 22 25 30 22 25 30 25 30 35 30 35 30 35 35 35 Length (mm) 25 30 30 25 35 30 25 40 35 25 45 40 30 45 35 30 50 40 30 45 35 50 40 45 50 25 30 25 35 30 40 30 25 45 35 30 50 40 30 50 35 30 45 35 50 40 40 50 Part No. PET sleeve Terminal Length 4.0 mm (Without Top Plate) EETXB2F820HJ EETXB2F101HJ EETXB2F121HJ EETXB2F121JJ EETXB2F151HJ EETXB2F151JJ EETXB2F151KJ EETXB2F181HJ EETXB2F181JJ EETXB2F181KJ EETXB2F221HJ EETXB2F221JJ EETXB2F221KJ EETXB2F271JJ EETXB2F271KJ EETXB2F271LJ EETXB2F331JJ EETXB2F331KJ EETXB2F331LJ EETXB2F391KJ EETXB2F391LJ EETXB2F471KJ EETXB2F471LJ EETXB2F561LJ EETXB2F681LJ EETXB2V820HJ EETXB2V101HJ EETXB2V101JJ EETXB2V121HJ EETXB2V121JJ EETXB2V151HJ EETXB2V151JJ EETXB2V151KJ EETXB2V181HJ EETXB2V181JJ EETXB2V181KJ EETXB2V221HJ EETXB2V221JJ EETXB2V221KJ EETXB2V271JJ EETXB2V271KJ EETXB2V271LJ EETXB2V331KJ EETXB2V331LJ EETXB2V391KJ EETXB2V391LJ EETXB2V471LJ EETXB2V561LJ Specification Ripple tan Current (120 Hz) (120 Hz) (+20 C) (+105 C) max. (A r.m.s.) 0.64 0.15 0.69 0.15 0.75 0.15 0.75 0.15 0.82 0.15 0.82 0.15 0.82 0.15 0.90 0.15 0.90 0.15 0.90 0.15 1.00 0.15 1.00 0.15 1.00 0.15 1.10 0.15 1.10 0.15 1.10 0.15 1.20 0.15 1.20 0.15 1.20 0.15 1.30 0.15 1.30 0.15 1.40 0.15 1.40 0.15 1.50 0.15 1.70 0.15 0.64 0.15 0.69 0.15 0.69 0.15 0.75 0.15 0.75 0.15 0.82 0.15 0.82 0.15 0.82 0.15 0.90 0.15 0.90 0.15 0.90 0.15 1.00 0.15 1.00 0.15 1.00 0.15 1.10 0.15 1.10 0.15 1.10 0.15 1.20 0.15 1.20 0.15 1.30 0.15 1.30 0.15 1.40 0.15 1.50 0.15 Min. Packaging Q'ty (V. DC) 180 220 315 270 330 390 470 560 680 82 100 120 150 180 350 220 270 330 390 470 560 (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 200 100 200 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 100 100 100 100 100 Endurance : 105 C 7000 h, Terminal Pitch : 10 mm When capacitors of 35 45L and 35 50L are mounted on PWB, reinforce them with mounting clamp or adhesives. (Avoid using adhesives including halogenated compositions.) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jul. 2008 Aluminum Electrolytic Capacitors/ XB Standard Products Case size W.V. Cap. (120 Hz) (20 %) (F) 56 68 82 100 120 Dia. (mm) 22 22 25 22 25 22 25 22 25 30 22 25 30 25 30 35 25 30 35 30 35 30 35 35 35 22 22 22 25 22 25 22 25 30 22 25 30 25 30 25 30 35 30 35 30 35 35 35 Length (mm) 25 30 25 35 25 35 30 40 35 25 50 40 30 45 35 25 50 40 30 45 35 50 40 45 50 25 30 35 25 40 30 45 35 25 50 40 30 45 30 50 40 30 45 35 50 40 45 50 Part No. PET sleeve Terminal Length 4.0 mm (Without Top Plate) EETXB2G560HJ EETXB2G680HJ EETXB2G680JJ EETXB2G820HJ EETXB2G820JJ EETXB2G101HJ EETXB2G101JJ EETXB2G121HJ EETXB2G121JJ EETXB2G121KJ EETXB2G151HJ EETXB2G151JJ EETXB2G151KJ EETXB2G181JJ EETXB2G181KJ EETXB2G181LJ EETXB2G221JJ EETXB2G221KJ EETXB2G221LJ EETXB2G271KJ EETXB2G271LJ EETXB2G331KJ EETXB2G331LJ EETXB2G391LJ EETXB2G471LJ EETXB2W390HJ EETXB2W470HJ EETXB2W560HJ EETXB2W560JJ EETXB2W680HJ EETXB2W680JJ EETXB2W820HJ EETXB2W820JJ EETXB2W820KJ EETXB2W101HJ EETXB2W101JJ EETXB2W101KJ EETXB2W121JJ EETXB2W121KJ EETXB2W151JJ EETXB2W151KJ EETXB2W151LJ EETXB2W181KJ EETXB2W181LJ EETXB2W221KJ EETXB2W221LJ EETXB2W271LJ EETXB2W331LJ Specification Ripple tan Current (120 Hz) (120 Hz) (+20 C) (+105 C) max. (A r.m.s.) 0.51 0.15 0.56 0.15 0.56 0.15 0.64 0.15 0.64 0.15 0.69 0.15 0.69 0.15 0.75 0.15 0.75 0.15 0.75 0.15 0.82 0.15 0.82 0.15 0.82 0.15 0.90 0.15 0.90 0.15 0.90 0.15 1.00 0.15 1.00 0.15 1.00 0.15 1.10 0.15 1.10 0.15 1.20 0.15 1.20 0.15 1.30 0.15 1.40 0.15 0.37 0.15 0.40 0.15 0.47 0.15 0.47 0.15 0.53 0.15 0.53 0.15 0.56 0.15 0.56 0.15 0.56 0.15 0.64 0.15 0.64 0.15 0.64 0.15 0.72 0.15 0.72 0.15 0.79 0.15 0.79 0.15 0.79 0.15 0.87 0.15 0.87 0.15 1.00 0.15 1.00 0.15 1.19 0.15 1.38 0.15 Min. Packaging Q'ty (V. DC) 150 400 180 220 270 330 390 470 39 47 56 68 82 100 450 120 150 180 220 270 330 (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 200 100 200 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 100 100 100 100 100 Endurance : 105 C 7000 h, Terminal Pitch : 10 mm When capacitors of 35 45L and 35 50L are mounted on PWB, reinforce them with mounting clamp or adhesives. (Avoid using adhesives including halogenated compositions.) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Jul. 2008 |
Price & Availability of EETXB2P221HJ
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |